BODY TWISTER

Model No. : FOG-05

Advantage: The Body Twist will help to improve flexibility, especially in the lower back and hips.

• Unit Dimension : 48”(H),  5’ (W)
• Safe Area: 8’ X 8’
• Pipe Size: 100 mm  ID B-class GI main pipe
• Handel: 25 mm  ID B-class GI pipe
• Step:03 no Plastic.
• Bearings: NBC 3205
• Colors: PU
• Nut & Bolts: S.S.

Specifications:

SIZE/ DIMENSIONS	Length	600 - 2000
	Width	600 - 2000
	Height	800 - 1500
CAPACITY	Maximum User Weight ( Kg )	120.0
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1239 ( Part 1 )- 2004, latest
	All the GI Pipes are ISI marked	Yes
	Main Central Pipe	150mm Nominal Bore G.I. Pipe
	Main Frame Pipe, Class as per IS 1239	Heavy
	Main Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness	125 mm NB with 4.5 mm Thickness
	Grade Material as per table 2 of IS 1161	YSt 310
	Standing/ Sitting Twister Frame Pipe	50 mm Nominal Bore G.I. Pipe
	Standing/ Sitting Twister Frame Pipe, Class as per IS 1239	Heavy
	Standing/ Sitting Twister Frame Pipe (As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness	40 mm NB with 3.2 mm Thickness
	Grade Material as per table 2 IS 1161	YSt 310
	Rotating Disk Support Pipe at Bottom Pipe	100 mm Nominal Bore G.I. Pipe
	Rotating Disk Support Pipe, Class as per IS 1239	Heavy
	Rotating Disk Support Pipe ( as per IS 1161 ) as per Clause 3, Nominal Bore & Wall Thickness	100 mm NB with 5.4 mm Thickness
	Grade Material (as per table 2 of IS 1161 )	YSt 310
	Handle Frame Pipe	32mm Nominal bore G.I. pipe
	Handle Frame Pipe, Class as per IS 1239	Heavy
	Handle Frame Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	32 mm NB with 4 mm Thickness
	Grade Material per table 2 of IS 1161	YSt 310
	Foundation Pipes with anchoring	750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
	Nominal Bore of Foundation Pipe	150mm
	Foundation Pipe, Class as per IS 1239	Heavy
	Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	100 mm NB with 4.5 mm Thickness
	Grade Material (as per table 2 of IS 1161)	YSt 310
	M S Foundation Plate Thickness	12.0
	Galvanization of all Pipes	Zinc coating on the tubes shall be in accordance with IS 4736 latest.
	Movement must be supplied with bearings	Yes
	Bearings	Tapered Roller Bearing
	Bearings shall be self lubricating and sealed for protection against Rain and dust etc	Yes
	Nuts and Bolts for Assembly	Stainless Steel, G.I.
	Foot Rest	Fibre Reinforced Plastic
	Closing Caps of open ends of the pipes, bearings, bushes and base	SS 304 Grade Stainless Steel, G I Caps, Fibre Reinforced Plastic, HDPE, Nylon
	Thickness of closing caps ( min )	2, 3
	All Plastic Components	U V stabilised, weather resistance
COLOUR	Colour	Yellow, Red, Blue, Green, As per buyer's requirements
	Paint// Finish	Powder Coated, UV resistant, Poly Urethane Paint, UV Resistant
	Paint Coating Thickness ( min )	80, 100
OTHER REQUIREMENTS	Other Requirement	Ergronomic Design, Equipment shall be free from entrapments and sharp edges, Installation Instructions must be provided
	Installation	Not Included
	Safety and quality Requirements	European Standard EN 16630: 2015 latest
	Instruction Plate	Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing
APPROVAL	Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer	Yes
WARRANTY	Warranty ( years )	5.0