Sit Up Board
Model No. : FOG-17
Specifications:
| SIZE/ DIMENSIONS | Length | 1000 - 2500 |
| Width | 500 - 2000 | |
| Height | 500 - 1000 | |
| MATERIAL | Type of Back Rest | Perforated Sheet |
| Material of Back Rest | Galvanized Iron(GI) | |
| Thickness of Back Rest | 1 - 10 | |
| Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest | |
| All the GI Pipes are ISI marked | Yes | |
| Main Frame/Central Pipe | 100 mm Nominal Bore G.I. Pipe | |
| Main Frame/Central Pipe, Class as per IS 1239 | Heavy | |
| Main Frame/Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 100 mm NB with 3.6 mm Thickness | |
| Grade of Material as per table 2 of IS 1161 | YSt 210 | |
| Foot Rest Pipe | 32mm Nominal Bore G.I. Pipe | |
| Foot Rest Pipe , Class as per IS 1239 | Heavy | |
| Foot Rest Pipe ( As per as per Clause 3, of IS 1161 ) , Nominal Bore & Wall Thickness | 32 mm NB with 3.2 mm Thickness | |
| Grade of Material as per table 2 IS 1161 | YSt 210 | |
| Back Rest Frame Pipe and Connecting Links | 32 mm Nominal Bore G.I. Pipe | |
| Back Rest Frame Pipe and Connecting Links, Class as per IS 1239 | Heavy | |
| Back Rest Frame Pipe and Connecting Links ( As per Clause 3, of IS 1161 ) Nominal Wall & Thickness | 32 mm NB with 2.6 mm Thickness | |
| Grade of Material (as per table 2 of IS 1161 ) | YSt 210 | |
| Leg Support Pipe | 32mm Nominal bore G.I. pipe | |
| Leg Support Pipe , Class as per IS 1239 | Heavy | |
| Leg Support Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 32 mm NB with 2.6 mm Thickness | |
| Grade of Material per table 2 of IS 1161 | YSt 210 | |
| Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm | |
| Nominal Bore of Foundation Pipe | 100mm | |
| Foundation Pipe, Class as per IS 1239 | Heavy | |
| Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 100 mm NB with 3.6 mm Thickness | |
| Grade of Material (as per table 2 of IS 1161) | YSt 210 | |
| M S Foundation Plate Thickness | 12.0 | |
| Galvanization of all Pipes | Zinc coating on the tubes shall be in accordance with IS 4736 latest. | |
| Nuts and Bolts for Assembly | Stainless Steel, G.I., Not Applicable | |
| Closing Caps of open ends of the pipes, bearings, bushes and base | SS 304 Grade Stainless Steel, G I Caps, Fibre Reinforced Plastic, Not Applicable | |
| Thickness of closing caps ( min ) | 2, 3 | |
| All Plastic Components | U V stabilised, weather resistance, Not Applicable | |
| COLOUR | Colour | Yellow, Red, Blue, Green, As per buyer's requirements |
| Paint// Finish | Powder Coated, UV resistant, Poly Urethane Paint, UV Resistant | |
| Paint Coating Thickness ( min ) | 80, 100 | |
| OTHER REQUIREMENTS | Other Requirement | Ergronomic Design, Equipment shall be free from entrapments and sharp edges, Installation Instructions must be provided |
| Installation | Included | |
| Safety and quality Requirements | European Standard EN 16630: 2015 latest | |
| Instruction Plate | Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing | |
| APPROVAL | Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer | Yes |
| WARRANTY | Warranty ( years ) | 2.0 |