CHEST PRESS

Model No. : FOG-11

Advantage: This piece of equipment will provide an upper body workout focusing on the chest and arms. This unit will develop and strengthen the muscles.

• Unit Dimension: 84”(H),  80”(L), 30”(W)
• Safe Area: 17’ x 10’
• Pipe Size:75 mm  ID B-class GI main pipe
•  Connecting Pipe: 32 mm,25mm & 20 mm
• Seats: Plastic
• Bearings:  NBC 6004
• Colors: PU
• Nut & Bolts: S.S.

Specifications:

SIZE	Length	1000 - 2000
	Width	650 - 800
	Height	1600 - 2200
CAPACITY	Maximum User Weight ( Kg )	120.0
MATERIAL	Governing Specification for GI Pipes	BIS specification No IS 1239 ( Part 1 )- 2004, latest
	All the GI Pipes are ISI marked	Yes
	Main Central Pipe	125 mm Nominal Bore G.I. Pipe
	Main Central Pipe, Class as per IS 1239	Heavy
	Designation of Main Central Pipe ( as per IS 1161 )	Any applicable text(s)
	Handle Frame	32mm Nominal bore G.I. pipe
	Handle Frame Pipe, Class as per IS 1239	Heavy
	Designation of Handle Frame Pipe ( as per IS 1161 )	Any applicable text(s)
	Seat Frame	32mm Nominal Bore G.I. Pipe
	Seat Frame Pipe, Class as per IS 1239	Heavy
	Designation of Seat Frame Pipe ( as per IS 1161 )	Any applicable text(s)
	Connecting Links	32mm Nominal Bore G.I. Pipe
	Connecting Links Pipe, Class as per IS 1239	Heavy
	Designation of connecting link Pipe ( as per IS 1161 )	Any applicable text(s)
	Foot Rest Pipe	25mm Nominal Bore G.I. Pipe
	Foot Rest Pipe, Class as per IS 1239	Heavy
	Designation of Foot Rest Pipe ( as per IS 1161 )	Any applicable text(s)
	MS Foundation Plate Thickness	10.0
	Foundation Pipes with anchoring	500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
	Nominal Bore of Foundation Pipe	125mm
	Foundation Pipe, Class as per IS 1239	Heavy
	Designation of Foundation Pipe ( as per IS 1161 )	Any applicable text(s)
	Galvanization of all Pipes	Zinc coating on the tubes shall be in accordance with IS 4736 latest.
	Seat and Back Rest	6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges
	Hand Grips	Rubber, Nylon, Polyurethane
	Nuts and Bolts for Assembly	Stainless Steel, G.I.
	Movement must be supplied with bearings	Yes
	Bearings	Ball Bearing
	Bearings shall be self lubricating and sealed for protection against Rain and dust etc	Yes
	Closing Caps of open ends of the pipes, bearings, bushes and base	SS 304 Grade Stainless Steel, G I Caps, Fibre Reinforced Plastic, HDPE, Nylon
	Thickness of closing caps ( min )	2, 3
	All Plastic Components	U V stabilised, weather resistance
COLOUR	Colour	Yellow, Red, Blue, Green, As per buyer's requirements
	Paint// Finish	Powder Coated, UV resistant, Poly Urethane Paint, UV Resistant
	Paint Coating Thickness ( min )	80, 100
OTHER REQUIREMENTS	Ergonomic Design	Yes
	Moving Scope should be Limited	Yes
	There shall be no crushing or searing points for user between moving and / or stationary parts of equipment during use	Yes
	Equipment shall be free from entrapments and sharp edges	Yes
	Installation Instructions must be provided	Yes
	Installation	Included
	Safety and quality Requirements	European Standard EN 16630: 2015 latest
	Instruction Plate	Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing
APPROVAL	Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer	Yes
WARRANTY	Warranty ( years )	2.0